Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

Ef won't start. Starter not engaging.

Old Jul 14, 2009 | 08:14 AM
  #21  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

Originally Posted by mk378
You want to turn the engine counterclockwise, the way it normally runs. Go through at least two full revolutions. If you can turn the engine part of a turn but then it jams, there is probably water in one of the cylinders, or the timing belt is way off and the valves are crashing.
Went through 2 revolutions counterclockwise. No "jams" it gets tough once in a while but im only using a 6" rachet?
 
Old Jul 14, 2009 | 08:39 AM
  #22  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

Starter passed.
 
Old Jul 14, 2009 | 09:18 AM
  #23  
RonJ's Avatar
Recognized HCF Member
Joined: Sep 2007
Posts: 9,453
From: Houston, Texas
Default

Is the battery low or dead?

Maybe you should try a push start again. Hold the clutch down with the key in ON(II) and the transmission in first gear while a buddy pushes the car or you are rolling down hill. Then pop the clutch.
 
Old Jul 14, 2009 | 09:59 AM
  #24  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

Originally Posted by RonJ
Is the battery low or dead?

Maybe you should try a push start again. Hold the clutch down with the key in ON(II) and the transmission in first gear while a buddy pushes the car or you are rolling down hill. Then pop the clutch.
Thats what I had tried and it stops ridiculously fast. I'll go get my battery charged then try again :/
 
Old Jul 14, 2009 | 10:20 AM
  #25  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

ITS ALIVE HOLY **** ITS ALIVE PRAISE GOD! ALL CAPS! Autozone failed miserably when charging my battery.
 
Old Jul 14, 2009 | 10:33 AM
  #26  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

I would just like to say thanks so much ronj and mk378 for your patience and help.
 
Old Jul 14, 2009 | 11:20 AM
  #27  
RonJ's Avatar
Recognized HCF Member
Joined: Sep 2007
Posts: 9,453
From: Houston, Texas
Default

I am so glad all is fine with the engine. Any ideas about why the car went into a skid when you popped the clutch to start the engine?
 
Old Jul 14, 2009 | 11:27 AM
  #28  
mk378's Avatar
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Default

I like to roll-start (forward) in second gear. First tries to spin the engine too fast and it seems a lot harsher. Course if you must roll the car backwards you only have the one choice of reverse.
 
Old Jul 14, 2009 | 11:29 AM
  #29  
RonJ's Avatar
Recognized HCF Member
Joined: Sep 2007
Posts: 9,453
From: Houston, Texas
Default

Originally Posted by mk378
I like to roll-start (forward) in second gear. First tries to spin the engine too fast and it seems a lot harsher.
That's a good idea.
 
Old Jul 14, 2009 | 11:51 AM
  #30  
jpnolan's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 1,833
From: Miami, Florida
Default

Originally Posted by RonJ
I am so glad all is fine with the engine. Any ideas about why the car went into a skid when you popped the clutch to start the engine?
Cause I have an extremely stiff clutch?

I like that for push starting I'll keep that in mind.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bmarsh1605
Mechanical Problems & Technical Chat
3
Dec 2, 2011 07:44 AM
mushi
Mechanical Problems & Technical Chat
4
Aug 22, 2010 11:48 AM
RP Sinisterx
Mechanical Problems & Technical Chat
1
Aug 21, 2010 11:38 PM
comapro
Mechanical Problems & Technical Chat
14
Oct 20, 2008 02:05 PM
Sk8_2_rel8
Mechanical Problems & Technical Chat
6
Oct 10, 2006 03:20 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 11:23 PM.