Heater core inlet hose?
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 18
Heater core inlet hose?
Ok; 91 Civic 1.5 Which hose do I need to cut to install the " T " for the cooling system flush kit. I know is the inlet but which one it's, the one coming from the head or the one from the thermostat housing? I belive the one from the thermostat housing but just want to make sure. Thanks
Last edited by Jorge.s; Aug 24, 2008 at 08:48 AM.
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Coolant flows out of the head, into the heater, and back to the thermostat housing. So the one from the head is the inlet hose.
You really don't need that flush kit, just disconnect the hoses and flush manually by holding a garden hose up to the hose ends.
You really don't need that flush kit, just disconnect the hoses and flush manually by holding a garden hose up to the hose ends.
Thread
Thread Starter
Forum
Replies
Last Post
voxleo
Mechanical Problems & Technical Chat
2
Jul 20, 2012 05:26 PM
voxleo
Mechanical Problems & Technical Chat
0
Jul 19, 2012 11:55 PM
