i was able to get the bracket off but how do you guys reach the 3 bolts that hold the mount on.........i don't have access to a lift.

thanks
92 civic hatch

 

with a piece of wood in between a jack and the oil pan, jack up the engine CAREFULLY and just enought to relieve pressure from the motor mount.

 

sorry, maybe i didn't ask it properly, i couldn't get to the 3 bolts on the mount, i already had the bracket and mount separated, so there was no weight on the mount. is there a very long wrench or something. thanks

 

are you talking about the part of the mount that attatches to the engine, or the part that attatches to the car. the ones on the engine are defintally fun to get off and it will take awhile. go to a place that sells tool and get yourself a long breaker bar, you can get them up to 5 ft i think but you wont need one near that big. i know that i can get my air hammer back there to get them so if you have a small one try that too

 

thanks ski, it's the one that connects to the car (with the rubber insert)

 

bump