New Member Introductions Are you new to Honda Civic Forum? WELCOME! Check in, tell us about yourself and your ride. This section is not for technical questions.

I/H/E before Turbo?

Old Jul 27, 2006 | 12:47 AM
  #1  
deeg's Avatar
Thread Starter
Joined: Jul 2006
Posts: 9
Default I/H/E before Turbo?

Asking what is probably some noob questions, but I want to understand this better...

I have a 05 EX Coupe. At some point I'd like to put in, or more likely, have someone else put in a turbo. Until then, I'd like to do pop on some I/H/E bolt-ons. When I finally go for the turbo, will the intake and headers I previously installed be replaced by components specific to the turbo system? In other words, is it wasted effort and money to put in a new intake and headers if I'm going to eventually get a turbo anyways? Or will these systems compliment the turbo or even be used by the turbo?

If this is in the wrong section, feel free to move it. It seems to span topics from several sections, so I wasn't entirely sure where it should go.
 
Old Jul 27, 2006 | 01:06 AM
  #2  
civicexracer's Avatar
Moderator
Joined: Jul 2005
Posts: 5,802
Default RE: I/H/E before Turbo?

WELCOME! honestly i think its a waist to spend roughly $500 on i/h/e if u know ur gena end up turboed...i'd just wait till i get the turbo set up and save that other money u woulda spent on an intake and header on other parts that u might need for the turbo set up and for broken parts...the only thing i might do is get 3 inch piping exhaust but even so kinda pointless cuz u'll lose power untill boosted..
 
Old Jul 27, 2006 | 03:34 AM
  #3  
TicKeR_96_HaTcH's Avatar
HCF Member
Joined: May 2006
Posts: 314
From: Ontario Canada
Default RE: I/H/E before Turbo?

U'll be fine with 2.5' piping for your exhaust, even when turboed. Unless you plan on gaining insane HP, then I'd say go for the 3' piping.

TiCkEr
 
Old Jul 27, 2006 | 06:22 AM
  #4  
Forty04's Avatar
Laced with Sarcasm
Joined: Mar 2005
Posts: 15,280
Default RE: I/H/E before Turbo?

Definitely do NOT put a header and intake on your car if you plan on boosting, it's a complete waste. You wont be able to use either when it comes time to boost so what's the point of ever putting them on? At least you've got a solid plan in mind, unlike me who piddled around with a couple bolt ons before snapping out of it and realizing I wanted to boost. Could have saved myself a lot of time and money, but ya live and learn

Good luck on your project, and welcome to the forum!
 
Old Jul 27, 2006 | 10:51 AM
  #5  
MDCivic's Avatar
Joined: Feb 2006
Posts: 159
From:
Default RE: I/H/E before Turbo?

If the mod bug is biting you, go ahead and do the i/h/e, but don't expect too much. When you are ready for the turbo, you could easily sell those parts on ebay or here to re-coup some of your money. Have fun though!!!
 
Old Jul 28, 2006 | 12:56 AM
  #6  
BlackDragon's Avatar
Joined: Jun 2006
Posts: 18
Default RE: I/H/E before Turbo?

turbo 7th gen, rode in my buddies and it was dead slow. But if you want to turbo, dont waste money on i/h.
 
Old Jul 28, 2006 | 11:44 AM
  #7  
BillyB98's Avatar
HCF Member
Joined: Jul 2006
Posts: 1,041
From:
Default RE: I/H/E before Turbo?

I got i/h/e and still plan on a turbo in my future. But im only 17 so its not in my plans for a couple of years. It just all depends on how far down the road you think the turbo will be.
 
Old Jul 28, 2006 | 07:34 PM
  #8  
cyberx32's Avatar
HCF Member
Joined: Jun 2006
Posts: 4,396
From:
Default RE: I/H/E before Turbo?

Yeah that turbo hits you in the wallet pretty good, but if you really want it save and get it.
 
Old Jul 28, 2006 | 08:10 PM
  #9  
Tater's Avatar
HCF Member
Joined: Jun 2006
Posts: 1,726
From: sterling heights MI
Default RE: I/H/E before Turbo?

ORIGINAL: civicexracer

WELCOME! honestly i think its a waist to spend roughly $500 on i/h/e if u know ur gena end up turboed...i'd just wait till i get the turbo set up and save that other money u woulda spent on an intake and header on other parts that u might need for the turbo set up and for broken parts...the only thing i might do is get 3 inch piping exhaust but even so kinda pointless cuz u'll lose power untill boosted..
I agree with what my co worker here says. +1 ( we are the welcoming crew if you didnt know)
 
Old Jul 31, 2006 | 09:34 AM
  #10  
spooned_civic's Avatar
Joined: Jul 2006
Posts: 35
From:
Default RE: I/H/E before Turbo?


ORIGINAL: Forty04

Definitely do NOT put a header and intake on your car if you plan on boosting, it's a complete waste. You wont be able to use either when it comes time to boost so what's the point of ever putting them on? At least you've got a solid plan in mind, unlike me who piddled around with a couple bolt ons before snapping out of it and realizing I wanted to boost. Could have saved myself a lot of time and money, but ya live and learn

Good luck on your project, and welcome to the forum!

Exactly.

if your plan is to do turbo then do not do I/H. as they will not be able to be used with your turbo plans.

 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ScottPrindle
Nitrous, Super Chargers, & Turbos
1
May 20, 2007 05:42 PM
canadianhamster
Inside and Out
6
Apr 1, 2005 10:36 AM
corye03
Inside and Out
13
Mar 19, 2005 07:48 AM
DenkiEx
EK Swaps
15
Feb 26, 2005 06:37 PM
91_Si
Mechanical Problems & Technical Chat
0
Oct 19, 2004 11:15 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:05 AM.