what to do next?
#4
next u should?
well to tell you the truth you might have been better off with a cold air intake from someone like injen, header should be next always its the first of the bottle neck, next down pipe and cat back, working at a tuning shop these bring great results
#5
well hello, and congrats on the new 6th gen si.
k20s love to breathe, so let that motor breathe.
1st, finish the intake portion. buy the thermal intake mani gasket along with p2rs throttle body spacer. These mods dont cost much but they are worth it. Then look for an exhaust. dont get anything with less than a 70mm, then get a race header, and finally wait for k-pro/i-pro whatever hondata is gonna call it, or u can just go with the reflash.
then go with a short shifter, complimented by twms base cable and shifter cable bushings kits. feels so much better when shifting.
There is so much you can do, you just gotta pick a direction and a budget. Feel free to pm me if you have any questions.
k20s love to breathe, so let that motor breathe.
1st, finish the intake portion. buy the thermal intake mani gasket along with p2rs throttle body spacer. These mods dont cost much but they are worth it. Then look for an exhaust. dont get anything with less than a 70mm, then get a race header, and finally wait for k-pro/i-pro whatever hondata is gonna call it, or u can just go with the reflash.
then go with a short shifter, complimented by twms base cable and shifter cable bushings kits. feels so much better when shifting.
There is so much you can do, you just gotta pick a direction and a budget. Feel free to pm me if you have any questions.
Thread
Thread Starter
Forum
Replies
Last Post
grncivicvtec
Nitrous, Super Chargers, & Turbos
4
01-07-2005 12:05 AM