Nitrous, Super Chargers, & Turbos All charged talk about going FAST.

i need your help!!

Thread Tools
 
Search this Thread
 
Old Jun 20, 2006 | 12:00 AM
  #1  
ficodecko's Avatar
Thread Starter
Joined: Apr 2006
Posts: 110
From: Akron Ohio
Default i need your help!!

so this weekend i decided when i woke upmy civic was boring so i dropped 600 bux at summit because its next door and then dropped a NOS tank in my car that day its sexy no doubt...i couldnt get the open throtle lever to fit in there so i pulled it in the cabin with me and i just push it when i want to be shoved to the back of my seat but thats not my problem...the day after i got my civic sex-ified witht he NOS i went and got my project car which is an 88 CRX SI(there is a whole nother story off allthe **** i went through but another time) its got a body kit and i will get pix of both the nitro and my crx (after i pull it out of impond) soon....but im doing a right hand conversion with the crx and puting a b16a in it how much boost can i run off the stock internals i dont plan on keeping them stock ill get new pistons and rods along witha block saver i would do the sleving but i cant find anywhere to do it if anyone knows let me know so basicly thats it
-=-fico-=-
 
Old Jun 21, 2006 | 02:23 AM
  #2  
slvcivic00's Avatar
HCF Member
Joined: Jan 2005
Posts: 196
From:
Default RE: i need your help!!

Stock internals: 6-10psi with a good tune
Built internals: 10-15psi with a great tune
However my numbers may be off a few psi or so.
 
Old Jun 21, 2006 | 11:42 AM
  #3  
Nail I3unny's Avatar
HCF Member
Joined: Mar 2005
Posts: 7,702
From:
Default RE: i need your help!!

the CFT civic has a built GSR and is running between 27 and 30 psi at the track. it all depends on the build and the tune.
 
Old Jun 21, 2006 | 12:27 PM
  #4  
ficodecko's Avatar
Thread Starter
Joined: Apr 2006
Posts: 110
From: Akron Ohio
Default RE: i need your help!!

ok cool so what if i dont have the block sleves just like rods pistons and a block saver?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MattGeetar
Mechanical Problems & Technical Chat
7
Jan 12, 2012 08:41 PM
natecivic92
The Lounge
38
Jan 19, 2006 01:10 PM
skytanker2003
The Lounge
27
Jan 17, 2006 11:02 AM




All times are GMT -8. The time now is 07:42 AM.