or you can just take the nut off from the fan and tie a shoestring to the line and just pull. thats how i did mine and it worked good, just get the **** outta the way.

 

^ isn't that how you guys did tony's too?

 

This is gonna be fun!

 

yup, only the string didn't work at first and my buddy almost end up taking the entire charge to the face

 

Best way to do it is wear some gloves, take the cap off the valve, and open it with a nail. Trust me on this, refrigerant burns suck. I've learned that the hard way (multiple times).

 

I'm bringin' this thread back right fast...My a/c doesn't work anyway and I don't feel like buying a new condencer [sp?] because I don't need a/c that bad, I can just roll my windows down and be fine. I will take my car to a shop and have them take the freon out of it properly... lol

My haynes manual would show how to take it out I assume.

But my question is what all do you have to take out, just the fan and the condencer thing that looks like the radiator or are there more parts to the a/c than that?

 

Compressor, condenser, lines, etc. Whatever you can get to and want to take out, do it.