Ok so I have a '95 hatchback.....needs a new lower control arm so the backstory is i went to my junkyard got one and it turns out that i didnt get the whole thing mostly since i didn think i needed it and turns out i did all the civics '92-'95 and i got the best one i could find still was pretty darn rusty...yet the ones on the '96-'00's they had where in awsome condition so i am wondering if they would bolt in place of the '92-95 lower control arm.....if thats confusing you all i am wondering is if a lower control arm from a '96-00 will fit a '95 civic---since it pretty much looks like it would work my hatch dosent have a sway bar also i dont know why...if that matters...

 

front or rear?

 

front

 

I'm not 100% sure; they are a similar style, and the bushings are the interchangeable, but I don't know if the measurements are exactly the same.

 

i believe they wont fit.

 

ok well wanted to know before hand but woot now that i know bushing s are interchangeable i should be fine

 

i know the rear ones are interchangeable if you are lowered more than an inch...but im not sure on the front ones. ask if you can get them and return them if they dont work.

 

???

 

comes from roto. he had 6G RLCA's on his '94 (or so he says). they work but onlyif you're lowered.

idk it may have been someone else who told me that.