special pressure plate bolts?
Thread Starter
|
HCF Member
Joined: Aug 2007
Posts: 53
special pressure plate bolts?
Hello I am doing the 95 civic d15b7 5 speed swap and already ordered the flywheel bolts. I need to know if the clutch prressure plate bolts are special design. Or can I just use bolts that fit
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
RE: special pressure plate bolts?
well not sure, but i would just buy new bolts. thats what i did when i replaced my clutch setup...
its cheap insurance because the fly wheel uses pretty fine thread.
id just sugest buying new OEM bolts all the way around for the clutch setup.
id asume they are hardened bolts, and also BE SURE to use LOCKTITE on the clutch bolts! with them ALWAYS SPINNING and the intense vibrations from the motor they can easily back out and loosen up... and its a HUGE PITA to pull the tranny/motor apart to access these bolts. dont cheap out on something so vital!
this is what mine look like...
its cheap insurance because the fly wheel uses pretty fine thread.
id just sugest buying new OEM bolts all the way around for the clutch setup.
id asume they are hardened bolts, and also BE SURE to use LOCKTITE on the clutch bolts! with them ALWAYS SPINNING and the intense vibrations from the motor they can easily back out and loosen up... and its a HUGE PITA to pull the tranny/motor apart to access these bolts. dont cheap out on something so vital!
this is what mine look like...
Thread
Thread Starter
Forum
Replies
Last Post
bobertv123
Mechanical Problems & Technical Chat
4
May 24, 2012 10:02 AM
sway2003
Transmission & Differential
0
Mar 21, 2008 03:46 PM
