i got a 1990 honda civic dx hb, and just got my 98 gsr motor back from the shop and now i need help on what tranny i should use (which i want to keep my cable clutch)and how i go about connecting the engine harness....

thanks
hydro

 

first you have dual point right? you will need to rewire the ecu to covert your car's wiring from 2 fuel injectors(stock on dx) to 4 fuel injectors(mpfi)

 

are you keeping it obd0? if so you need obd0 injectors, 90-91 integra injectors will work, make it multi port, run the vtec wires, use a pr3, or pw0 computer(if you are staying
obd0). any b series cable tranny will work just get the clutch for the tranny you use.
(90-91 b series is different than 92-93).

 

correct. 90-91 is a small spline set up and 92-93 are larger. if you happen to go with a hydro trans you can use the 92-01 clutches. i would highly recommend going obd1 if its withing budget. it will give you more options for tuning.