Planning to swap a B18C1
#12
04-28-2007, 06:34 PM
RE: Planning to swap a B18C1
Most of the info you need can be found here: http://kosmo.homedns.org/trey/6gen/
#13
05-02-2007, 01:36 AM
RE: Planning to swap a B18C1
Alright after doing all my research I've gathered all the stuff I hope I need. I thought my buddy knew a lot but I guess he really didn't know too much except for, "YEAH IT WILL FIT".
LIST:
Complete 97 GSR engine
2000 civic si cluster
GSR Axles
GSR Shift Linkage
GSR ECU (OBDII)
GSRDriver and Transmission mounts (does it need to be the si ones or will the GSR ones work just fine?)
(I don't need AC!! WINDOWS FTMFW!!!! Just hope stop lights are green at all times lol)
1. Now for my other concerns, for my catback system, I am not using my OEM 96 cat converter but using a megan racing resonator or test pipe. Will I need to use the GSR's Cat Converter?
2. Wiring Harness... I am still confuse about this part.
Again I'll be dropping this badboy into my 96 EX coupe.
Thanks in advance.
LIST:
Complete 97 GSR engine
2000 civic si cluster
GSR Axles
GSR Shift Linkage
GSR ECU (OBDII)
GSRDriver and Transmission mounts (does it need to be the si ones or will the GSR ones work just fine?)
(I don't need AC!! WINDOWS FTMFW!!!! Just hope stop lights are green at all times lol)
1. Now for my other concerns, for my catback system, I am not using my OEM 96 cat converter but using a megan racing resonator or test pipe. Will I need to use the GSR's Cat Converter?
2. Wiring Harness... I am still confuse about this part.
Again I'll be dropping this badboy into my 96 EX coupe.
Thanks in advance.
#14
05-04-2007, 12:58 AM
RE: Planning to swap a B18C1
ORIGINAL: asttak
Alright after doing all my research I've gathered all the stuff I hope I need. I thought my buddy knew a lot but I guess he really didn't know too much except for, "YEAH IT WILL FIT".
LIST:
Complete 97 GSR engine
2000 civic si cluster
GSR Axles
GSR Shift Linkage
GSR ECU (OBDII)
GSRDriver and Transmission mounts (does it need to be the si ones or will the GSR ones work just fine?)
(I don't need AC!! WINDOWS FTMFW!!!! Just hope stop lights are green at all times lol)
1. Now for my other concerns, for my catback system, I am not using my OEM 96 cat converter but using a megan racing resonator or test pipe. Will I need to use the GSR's Cat Converter?
2. Wiring Harness... I am still confuse about this part.
Again I'll be dropping this badboy into my 96 EX coupe.
Thanks in advance.
Alright after doing all my research I've gathered all the stuff I hope I need. I thought my buddy knew a lot but I guess he really didn't know too much except for, "YEAH IT WILL FIT".
LIST:
Complete 97 GSR engine
2000 civic si cluster
GSR Axles
GSR Shift Linkage
GSR ECU (OBDII)
GSRDriver and Transmission mounts (does it need to be the si ones or will the GSR ones work just fine?)
(I don't need AC!! WINDOWS FTMFW!!!! Just hope stop lights are green at all times lol)
1. Now for my other concerns, for my catback system, I am not using my OEM 96 cat converter but using a megan racing resonator or test pipe. Will I need to use the GSR's Cat Converter?
2. Wiring Harness... I am still confuse about this part.
Again I'll be dropping this badboy into my 96 EX coupe.
Thanks in advance.
For my catback system I just used the B16 cat converter and it bolted right up to my EX catback. Don't know if this will be the same for a B18C1.
And the wiring that my uncle did for me lol, so I can't really answer that from personal experience.
Hope this helps GL on your swap.
Thread
Thread Starter
Forum
Replies
Last Post
vmf
Mechanical Problems & Technical Chat
4
03-10-2008 10:11 AM
