"what have you done to your civic today?"
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
dito... dont cheap out once and ya wont have to pay again. your suspension is a serious issue.
and to stay on topic.... AGAIN my 99 civic will be on stock suspension later today
getting ready to strip off all of it. gotta find my stock parts now hope i didnt throw away my old upper A arms! and i think ill have to buy a new rear uppercontrol arm because my one was siezed and i cut it off to instal the camber arms.
and to stay on topic.... AGAIN my 99 civic will be on stock suspension later today
getting ready to strip off all of it. gotta find my stock parts now hope i didnt throw away my old upper A arms! and i think ill have to buy a new rear uppercontrol arm because my one was siezed and i cut it off to instal the camber arms.
Last edited by addiction2bass; Dec 5, 2008 at 05:37 AM.
HCF Member
Joined: Nov 2008
Posts: 31
kicked it and told it to run. didnt work
**anybody have a working distributor for a 95 1.6? ** or anything that will work. i would rather not pay 200 bucks for a new one or 100 for a junkyard piece.
cavalier though: remounted exhaust in rear (came loose, re welded and bolted) added prothane solid motor mount on rear.
**anybody have a working distributor for a 95 1.6? ** or anything that will work. i would rather not pay 200 bucks for a new one or 100 for a junkyard piece.
cavalier though: remounted exhaust in rear (came loose, re welded and bolted) added prothane solid motor mount on rear.
HCF Member
Joined: Aug 2008
Posts: 884
From: Victoria, BC, Canada
Bought brake cleaner and primer at the store while I was working. Could only find black wrinkle paint. I'll have to check a few more stores for red wrinkle, but I'll do that when I'm not on the clock.
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
man i hate stock springs! i forgot how much i hated them!
tomorrow im gonna run to local pullapart and see if any of the rear upper control/camber arms are seized up or not. i need the drivers side one at least i found the front upper Aarms. i got the front all together and one side of the rear done. my back is starting to hurt so i stoped.
so far the pile is starting to add up... it will be at least doubled by tomorrow night!
day 1 of striping for the last time....
back to 4x4 look.
i forgot how much i hated them!tomorrow im gonna run to local pullapart and see if any of the rear upper control/camber arms are seized up or not. i need the drivers side one
at least i found the front upper Aarms. i got the front all together and one side of the rear done. my back is starting to hurt so i stoped.so far the pile is starting to add up... it will be at least doubled by tomorrow night!
day 1 of striping for the last time....
back to 4x4 look.
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
o another day of striping.... i figure 1 more day of striping and it will be ready for sale..
only thing i have to pull now is pull the drivers side axle to swap the alternator back stock, remove the header and put it back stock and also find the stock air intake. and then my car will be back lame again...
im also gonna swap spark plugs and wires from my ex to my dx.
only thing i have to pull now is pull the drivers side axle to swap the alternator back stock, remove the header and put it back stock and also find the stock air intake. and then my car will be back lame again...
im also gonna swap spark plugs and wires from my ex to my dx.
