^ i actually did not use the extra tubings i bought. i just replaced the nozzles and pulled the stock hose to get a little more and plugged the hose into the nozzles, works perfectly fine, so i would suggest not to get extra hoses just the nozzles, at least for the 99-00 civic coupes.

 

o dam... that sounds like a nice mod.... ive hated the civics washers for that very reason... clearing the salt spray off is a huge PITA with the two squirts.
you should make a DIY for that since im sure alot of people hate the 2 squirts!

and about the hoses just replace them.. i do on my car... no one likes a nasty brownish yellow hose at a show just cut off a piece of yours and go to lowes or home depo and buy some new clear vinyl tubing. i always replace mine.

 

+1 on the DIY, i would like to make that happen on my ef....i still havn't replaced the rice ones that came with my car.

 

for those rice washers i just ripped the wires off and spray painted mine on myold eg i had. i just taped off the area on the hood and with some rags and newspaper spray painted them right on the car.LOL

 

lol, i just used touch up paint to de-rice my light up squirters!

 

used a buffer for the first time to wax my car, which I'm sure is proud of me lol

 

I bought the RSX washer nozzle parts for the conversion, ebay'd a type R grille (FINALLY), ebay'd some tuner lugs so I can get my summer tires on, and am looking at some aerosol touchup paint so I can color match the grille, fog bezels, lips, side skirts, mirrors, and handles. I'll probably end up doing those a few at a time.

 

one of the bolts holding on the valve cover broke and came out and oil went everywhere so i did an oil change and got new gaskets for the valve cover and plugs and got new bolts for it

 

installed upper front and rear strut bars. Hope its ok that I didnt torque the bolts back down to specs. just tightened them really good.

 

As long as they're tight to where they won't come loose, it should be fine.