I have a 2005 Honda Civic EX im going to swap from auto to manual, I seen the other forms out there to do the swap I was just wondering beside the clutch, flywheel, master cylinder, slave cylinder, starter, manual mounts. I was wondering if I need the axles and manual sub-frame and also the cables and bolts to add the flywheel and any other things I might have left out. Thanks for the help!

 

You also need a manual ECU, clutch pedal and hydraulic system, shift linkage and interior trim, and of course lots of bolts. The ones that hold the flywheel onto the crank and the clutch cover to the flywheel are special. The best way to do this of course is to have a manual parts car on site.