Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

94 Civic DX wont start when hot outside...

Old Jul 7, 2010 | 10:40 AM
  #41  
at_home_mechanic's Avatar
Junior Member
Joined: Jun 2010
Posts: 7
Default

my car hesitates and stalls sometimes when i come to a stop sign or red light and only during the summer time could this be the culprit too?
 
Old Jul 7, 2010 | 10:44 AM
  #42  
RonJ's Avatar
Recognized HCF Member
Joined: Sep 2007
Posts: 9,453
From: Houston, Texas
Default

When was the last basic tune up done (plugs, wires, cap, and rotor)? Any CEL codes?
 
Old Jul 8, 2010 | 05:13 AM
  #43  
at_home_mechanic's Avatar
Junior Member
Joined: Jun 2010
Posts: 7
Default

no codes and i did a tune up less than 6 months ago i did not replace cap though you think thats it? and im burning oil what could it be besides piston rings?
 
Old Jul 8, 2010 | 06:35 AM
  #44  
RonJ's Avatar
Recognized HCF Member
Joined: Sep 2007
Posts: 9,453
From: Houston, Texas
Default

Does the CEL work?

Remove the cap and inspect the contact points for damage and corrosion.

Burning oil could also come from a blown head gasket or bad valve stem seals.
 
Old Jul 8, 2010 | 07:16 AM
  #45  
mk378's Avatar
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Default

You're saying it drives OK-- normal power, etc. but stalls out when you stop the car?
 
Old Jul 9, 2010 | 03:15 AM
  #46  
at_home_mechanic's Avatar
Junior Member
Joined: Jun 2010
Posts: 7
Default

yes it will stumble most of the time when i come to a stop and every once in a while it will stall
 
Old Jul 9, 2010 | 04:14 AM
  #47  
mk378's Avatar
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Default

Sounds like the IACV then. That part is used to control idle rpm, if it is clogged the car will not keep running at stop signs.
 
Old Jul 30, 2010 | 02:31 PM
  #48  
at_home_mechanic's Avatar
Junior Member
Joined: Jun 2010
Posts: 7
Default

can someone post a pic of the iacv location wise?
 
Old Aug 1, 2010 | 03:35 PM
  #49  
94civichatchback's Avatar
Chubby Chaser
Joined: Dec 2007
Posts: 4,681
From: whitwell,Tn 37397
Old Aug 4, 2010 | 02:13 PM
  #50  
at_home_mechanic's Avatar
Junior Member
Joined: Jun 2010
Posts: 7
Default

ok so i cleaned the iacv and then igot a engine light on and now i have a misfire on all cylinders
 

Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:00 PM.