Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

Civic hessitatin under load

Thread Tools
 
Search this Thread
 
  #21  
Old 03-02-2010, 09:12 PM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

Yes I def got spark Dame thing shocked the F out of me. Lol I'll check the 02
 
  #22  
Old 03-02-2010, 09:32 PM
RonJ's Avatar
Recognized HCF Member
Join Date: Sep 2007
Location: Houston, Texas
Posts: 9,453
Default

If cyl 4 is dead and unplugging the O2 sensor doesn't help, then compression test the cylinders.

Also, is cyl 4 getting fuel?
 
  #23  
Old 03-03-2010, 07:32 PM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

Well I'm getting fuel and spark and unpluged the 02 but it didn't change


I don't understand it but it only stumbles when it gets warm and below 3,000 rpm.

In 1st and 2nd gear most of the time.
 

Last edited by S142JZKillaV10; 03-03-2010 at 07:34 PM.
  #24  
Old 03-03-2010, 07:34 PM
RonJ's Avatar
Recognized HCF Member
Join Date: Sep 2007
Location: Houston, Texas
Posts: 9,453
Default

Is cyl 4 still dead?
 
  #25  
Old 03-04-2010, 03:59 AM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

#4 Is getting fuel and spark I'll have to check compression
 
  #26  
Old 03-14-2010, 11:11 AM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

So #1 165. #2 170. #3 150/145 #4 160/165

so obviously #3 is low

what is the compression spects and the vairation tolerance between cyl. ?????????
 
  #27  
Old 03-14-2010, 11:52 AM
RonJ's Avatar
Recognized HCF Member
Join Date: Sep 2007
Location: Houston, Texas
Posts: 9,453
Default

Cyl 3 is a little low, but not awful. You would like to see no more than 10% variation from the cylinder with the highest compression. Did you do the compression test as described at the link in my signature. Does adding a teaspoon of oil to cylinder 3 raise the pressure?
 
  #28  
Old 03-14-2010, 08:17 PM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

I didn't add the tea spoon but I will do so. I did notice a silver like chauky stuff on me radiator cap. Don't know if that means much but I do know it's not normal.
 
  #29  
Old 03-14-2010, 09:39 PM
Silver_Bullet_EK's Avatar
Junior Member
Join Date: Feb 2008
Location: Indianapolis
Posts: 1
Default hesatation under load

replace the upstream o2 sensor, i had the same issue with mine, i replaced it, reset the CEL and it ran fine and have had no issues since
 
  #30  
Old 03-15-2010, 07:07 AM
S142JZKillaV10's Avatar
HCF Member
Thread Starter
Join Date: Feb 2010
Posts: 36
Default

I don't have a Cel on and when I check for codes nothing comes up.

Did yours not register the 02 sensor but u still replaced it ??? Thanks


Originally Posted by Silver_Bullet_EK
replace the upstream o2 sensor, i had the same issue with mine, i replaced it, reset the CEL and it ran fine and have had no issues since
 


Quick Reply: Civic hessitatin under load



All times are GMT -8. The time now is 05:31 PM.