front Quater pannel removal
#1
front Quater pannel removal
Anyone got any good advice on removing the front quater pannels? or fenders or flares or whatever you guys call them. As u know, I skittled a roo at a hundred something clicks, and now u gotta replace some mashed up pannels. Im attempting to remove the quaters today I think. Is it front bar first? do i need to take the door off? Any guidance would be greatly appreciated. Cheers
#2
RE: front Quater pannel removal
ok, pop your hood, open your door, get your 12mm socket with extensions. remove the little clips in the fender that is attached to the plastic. then remove the 2-3 bolts on the fender in the engine compartment. then remove the side skirts and you'll see an additional 2 more bolts. and then hyper extend the door a little, and it will reveal 1-2 bolts that you need to remove. i'm having a brain fart on whether how many bolts total there are. i'd suggest removing the fender plastic and door jam bolts first.
#3
RE: front Quater pannel removal
Ok, bumper is off, lights are out, and every thing is sweet EXCEPT there is 2 bolts under the black skirting under the doors, which i cant get to without removing the skirting. Anyone know how to remove this? The Aus Civics are remarkably different to the US Civics but the concept is the same. Thanks for your help.
#4
RE: front Quater pannel removal
ORIGINAL: Chaos
Ok, bumper is off, lights are out, and every thing is sweet EXCEPT there is 2 bolts under the black skirting under the doors, which i cant get to without removing the skirting. Anyone know how to remove this? The Aus Civics are remarkably different to the US Civics but the concept is the same. Thanks for your help.
Ok, bumper is off, lights are out, and every thing is sweet EXCEPT there is 2 bolts under the black skirting under the doors, which i cant get to without removing the skirting. Anyone know how to remove this? The Aus Civics are remarkably different to the US Civics but the concept is the same. Thanks for your help.
#5
RE: front Quater pannel removal
Excellent, thanks mate, done and done. Only problem now is I pulled the quarters off, but the new ones that were suposed to arrive today havnt. Damn military mail, ITS NOT A BOMB, YOU DONT NEED TO X-RAY IT!
Thread
Thread Starter
Forum
Replies
Last Post
omgxitsxaxhatch
Mechanical Problems & Technical Chat
1
11-28-2006 10:53 PM
kennyl_10
ECU Tuning & Fuel Management
2
07-26-2005 10:07 PM