If i put a z6 in my 93 lx will i have to swap ecu's or is it plug and play (except the vtec will have to be wired up)? Anyone have a link on how to wire up the vtec then to? Sorry to be such a noob lol Thanks in advance

 

ECUs will need to be swapped. your ECU doesn't have any vtec control, so adding the four necessary wires will do no good, as the pin on the ECU isn't there.

 

What engine do you have right now? That'll make a difference if it's plug and play or not. btw, it's a D16Z6, there's no such thing as a d15z6.

Either way, it would be best to get the ECU from an EX/Si Civic 92-95. If you're on a budget there ways, but I wouldn't cheap out on that.

 

there is too a d15z6

D15Z6
[ul][*]VTEC-E[*]Found in:
[ul][*]1996-2000 Honda Civic LS (European Market)
[ul][*]Displacement: 1493 cm3[*]Bore and Stroke: 75 mm X 84.5 mm[*]Rod Length: 137 mm[*]Compression: 9.6:1[*]Power: 114 hp @ 6500 rpm[*]Torque: 98 ft·lbf (141 Nm) @ 5400 rpm[*]VTEC Switchover: 2500 rpm (3500rpm in 5th gear)[*]Valvetrain: SOHC VTEC-E (4 valves per cylinder)[*]Fuel Control: PGM-FI MPFI [/ul][/ul][/ul]

 

ya i meant d16z6 sorry lol type o lol
What is the the name of the ex/si ecu is it the p28 or p08 or what?
Everything else is direct bolt in correct?

 

p28

 

sweet thanks marty

 

i wuz working on doin the same thing to my car!!.... did u do it? how did it go? let me knw..[sm=helpout.gif]. k
im figuring out everything ima need n dnt wana mess up...[sm=smiley24.gif]

 

havent swaped yet sorry still figuring out if i have the funds for a b20 swap if not ill just throw in a d15 vtec or the z6........

 

oh okay... just let me knw
good luck wit da $$