i have some wires and hoses that are not hooked up because the idiots did not hook them up because they said the did not need to. tell me if thats true, if i can just take the hoses off and cut the plug in. they used the d series wiring harness and i have a d series alternator as well on my b series engine. the plug in goes into a d series engine and thats why it wont plug in.

[IMG]local://upfiles/4038/84CABE8B741445DEAABE1CEE5BE03880.jpg[/IMG]

[IMG]local://upfiles/4038/69A3993791A740E98A0767CC79E143A5.jpg[/IMG]

[IMG]local://upfiles/4038/656F035D551F47D68568CB03DE4AA732.jpg[/IMG]

 

Tyler you saw when we were there..Rich had his unplugged too...i dont think he would do it to his if it would mess it up...so i think your fine..but u never know

 

ya then do i just unscrew the white plug in or will that screw things up?

 

The first one should attatch to the thermostat at the back of the mani, Your also missing the narrow vacuum hose that attatches to top of throttle body.
That wiring plug should clip onto the side of the mani onto that empty sensor socket.

 

The white socket is for the IAT sensor.......

 

do any of these matter? i havent got to plug the throttle body hose