Engine Internal Upgrades [For Turboing]

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2006 | 08:10 PM

#11

ScoobyAddict14

formerly aryiman98civic

Joined: Jun 2005

Posts: 3,772

RE: Engine Internal Upgrades [For Turboing]

maybe a port and polish or sleeve the block as well

Sep 4, 2006 | 08:14 PM

#12

ef4life

Senior Member

Joined: Nov 2005

Posts: 2,667

From:

RE: Engine Internal Upgrades [For Turboing]

Quote:

ORIGINAL: Mr Mobsta Man

is there anything else that you think i should upgrade also, if im paying someone to rip my engine apart and replace pistons and rods im only doing to once so I would have them upgrade it all at the same time.

get the whole rotating assembly balanced to like 9 or 10k rpm (not that you should rev it that high). it is more reliablility than power, but it would free up some power. sleeveing is really unnessesary unless you plan to drive it hard often and use high boost often. i would get the head cleaned up, new valve seals and a serdi valve job and thats about it. and a better oil pump than stock, i think prodrive makes one for a d series