1998 Acura 1.6 EL , having idle issues
Thread Starter
|
Junior Member
Joined: Jun 2010
Posts: 6
The thermostat shouldn't have any bearing on the idle.
Did you physically remove the IACV and clean all the passages? Here is a DIY: https://www.hondacivicforum.com/foru...ad.php?t=62836
Did you physically remove the IACV and clean all the passages? Here is a DIY: https://www.hondacivicforum.com/foru...ad.php?t=62836
Got it fixed today by cleaning every sensor that I could find on the car, and also using Seafoam.
Thanks
Thread Starter
|
Junior Member
Joined: Jun 2010
Posts: 6
Thanks for the reply
It was a dirty sensor and the one I suspect was the speed sensor on the A/T. Although I did clean every other sensor and switch I could see s I cant be certain
Thanks
Sure glad it wasn't a head gasket!!
It was a dirty sensor and the one I suspect was the speed sensor on the A/T. Although I did clean every other sensor and switch I could see s I cant be certain
Thanks
Sure glad it wasn't a head gasket!!
Thread
Thread Starter
Forum
Replies
Last Post
talon4g63
Mechanical Problems & Technical Chat
0
Sep 21, 2009 02:03 PM
Stimpy
Suspension, Brakes, Tires & Wheels
9
Jul 26, 2006 06:44 PM
