CV Shaft Question
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
RE: CV Shaft Question2
It is OK if the ring on the nut breaks if that's what you're talking about. It just needs to be free of the shaft.
Once you have that, leave all 4 wheels on the ground (take the center cap out of the subject wheel so you can reach the nut). Set the brake and really lean on it with a breaker bar. It is standard right hand thread on both sides.
Once you have that, leave all 4 wheels on the ground (take the center cap out of the subject wheel so you can reach the nut). Set the brake and really lean on it with a breaker bar. It is standard right hand thread on both sides.
Thread
Thread Starter
Forum
Replies
Last Post
Mooseprint
Mechanical Problems & Technical Chat
1
Jul 26, 2010 04:47 AM
